How to Connect the Motorized Track
Watch how to connect the motorized curtain track.
How to Join the Track Sections
Follow these steps to join the two sections of your motorized curtain track before you mount it.
Step 1. Remove the center overlap carrier
Remove the center overlap carrier that is disconnected from the plastic glider. Set the carrier and its screws aside for reassembly.
Step 2. Bring the track sections together
Bring the two plastic gliders together so the exposed drive belt feeds back into the tracks. Line up both sections and push the ends together until they meet.
Step 3. Reattach the overlap carrier
Fasten the overlap carrier back onto the two plastic gliders.
Step 4. Tighten the track connector
Slide the connector over the seam so it spans both sections. Use an Allen wrench to tighten the connector screws.





















