How to Fix Ripple Fold Runners on the Motorized Track

Watch how to fix the runners on a motorized ripple fold curtain track.

How to Secure the Ripple Fold Runners

If the Ripple Fold runner stopper has shifted, use these steps to return it to the plastic glider and secure it.

Step 1. Remove the center overlap carrier
Use a screwdriver to remove the center overlap carrier so you can see the stopper and the plastic glider.

Step 2. Check the stopper
Compare the stopper’s position with the plastic glider. If it has slipped to the side, move it onto the glider as shown in the video.

Step 3. Reinstall the carrier
Refit the center overlap carrier over the glider and stopper.

Step 4. Secure the stopper
Tighten the screw on the overlap carrier so the stopper stays in place.

FAQ

With the center overlap carrier removed, check where the stopper sits. It should rest on the plastic glider.
The repair shown in the video only requires removing the center overlap carrier. The other runners can stay in the track.
Check that the stopper is seated on the plastic glider, then tighten the carrier screw to hold it in place.